Page 1 of 1
Lock ring for Shimano 10/11 speed cassette with 11 tooth cog
Posted: 09 Dec 2013, 21:02
by paul
I've stripped the thread:(
Does anyone have one spare?
I'm using one for a 12 tooth, but it is a bit too big.
Paul
Re: Lock ring for Shimano 10/11 speed cassette with 11 tooth
Posted: 10 Dec 2013, 08:46
by Jdubs
Hey Paul,
To tell you the truth, I did the same thing. I was running 11-speed on a 10-speed hub, and I stripped the threads. I just converted the cassette to 10-speed removing one of the middle cogs. It works just as good.
You might want to check out the Bikeclub in Redfern.
http://bikeclub.wordpress.com/
They're open Monday and Wednesday nights.
Jonathan
Re: Lock ring for Shimano 10/11 speed cassette with 11 tooth
Posted: 10 Jan 2014, 10:10
by timothy_clifford
I should have an old spare - if not I have a spare cassette (still in the box!) that would have one. Let me know if you want it.
Re: Lock ring for Shimano 10/11 speed cassette with 11 tooth
Posted: 12 Jan 2014, 21:23
by paul
Thanks Timothy it's sorted.
Got the parts from a LBS.
Paul
Re: Lock ring for Shimano 10/11 speed cassette with 11 tooth cog
Posted: 30 Jan 2016, 11:04
by Stuart
I've done the same thing to Trouty's 11 speed shimano cassette lockring. Do I just count the teeth to know if it's 11 or 12 tooth? Seems it's 12 to me. I can buy a replacement for $9.
Re: Lock ring for Shimano 10/11 speed cassette with 11 tooth cog
Posted: 31 Jan 2016, 15:39
by Eleri
Yes, you count the teeth.
And you have to count them several times because you get it wrong the first or second time.
