bent derailleur hanger?

Parts, bike builds, tools, tips and maintenance.
User avatar
paul
Posts: 247
Joined: 03 Feb 2008, 21:43
Location: Leichhardt

Postby paul » 05 May 2014, 20:06

I fell off recently and the bike landed on the right hand side.
The impact was severe enough to knock the forks and brifter out of line.

That has been fixed, but I'm finding the gears hard to tune, so suspect that I have bent the derailleur hanger.
Is there an easy way to test this and then get it back into line?

Paul

User avatar
humanbeing
Posts: 709
Joined: 26 Feb 2013, 12:16

Postby humanbeing » 05 May 2014, 20:28

Paul,
Derailleur Hanger Alignment Tool
Image
Pretty easy to use, you're welcome to borrow.
Have a great ride,
Peter

User avatar
paul
Posts: 247
Joined: 03 Feb 2008, 21:43
Location: Leichhardt

Postby paul » 05 May 2014, 20:51

Great, thanks Peter.
I'll be in touch.

Paul

User avatar
mikesbytes
Posts: 6991
Joined: 13 Nov 2006, 13:48
Location: Tempe
Contact:

Postby mikesbytes » 07 May 2014, 09:27

Is your hanger part of the frame or a separate component?

User avatar
humanbeing
Posts: 709
Joined: 26 Feb 2013, 12:16

Postby humanbeing » 07 May 2014, 10:43

Paul said it was a replaceable derailleur hanger on an aluminium frame. The derailleur alignment tool works well on a steel frame, I'm not certain about aluminium frames.
Have a great ride,
Peter

User avatar
Adrian E
Posts: 1163
Joined: 07 Mar 2007, 13:15
Location: Newtown

Postby Adrian E » 07 May 2014, 11:36

It'll work fine on any frame (steel, carbon or alloy). @Paul, the replaceable alloy hanger is designed to bend to mitigate any blow to the dropout. Most replaceable hangers can be straightened but some will become brittle and crack if they're bent too many times. It's a good idea to own a spare hanger and keep with you if you're ever travelling with your bike.

User avatar
paul
Posts: 247
Joined: 03 Feb 2008, 21:43
Location: Leichhardt

Postby paul » 07 May 2014, 14:40

Thanks Peter. Worked treat.
It was well out of line, so needed a bit of judicious bending.
Now changes sweeter than ever.
Paul

User avatar
humanbeing
Posts: 709
Joined: 26 Feb 2013, 12:16

Postby humanbeing » 07 May 2014, 15:53

Good news Paul.
Have a great ride,
Peter


Return to “The Workshop”

Who is online

Users browsing this forum: No registered users and 0 guests