Time Trial Bars

For all things Velodrome
User avatar
Nozzle
Posts: 510
Joined: 16 Feb 2011, 19:03
Location: Summer Hill, NSW

Postby Nozzle » 06 Jan 2016, 09:14

Hi All,

I'm looking to get a new set of tt bars for my track bike. My current tt bars work well on my old bike. My new bike has a longer top tube and unfortunately the bars I have are not adjustable.

Does anyone have a set of tt bars I could try out? I'm looking for a set with a relatively short reach but will need to be UCI legal.

They will be used for team pursuit and kilo tt. Any pointers on fitting, legality or recommendations on what to buy are also welcome. I'll be back at the track from next week (weather permitting).

Cheers,
Noel

User avatar
mikesbytes
Posts: 6991
Joined: 13 Nov 2006, 13:48
Location: Tempe
Contact:

Postby mikesbytes » 06 Jan 2016, 12:10

I'm gathering your saying that the stem is integrated

User avatar
Nozzle
Posts: 510
Joined: 16 Feb 2011, 19:03
Location: Summer Hill, NSW

Postby Nozzle » 06 Jan 2016, 12:56

I'm gathering your saying that the stem is integrated
Yes, Integrated Stem and non-adjustable reach on the bars and pad height. Not a great setup if you want to change anything. They were relatively cheap Ritchey Carbon ones.

I'd like short reach, separate stem and plenty of adjustability in stack height so I can fine tune my position.

User avatar
mikesbytes
Posts: 6991
Joined: 13 Nov 2006, 13:48
Location: Tempe
Contact:

Postby mikesbytes » 06 Jan 2016, 13:10

What I did was buy a base bar and use clip-ons, an inexpensive solution. While the hardware itself is not as aero as an integrated design, it allows for a lot more adjustment. Suggest this avenue if no one comes up with a suitable offering

User avatar
Nozzle
Posts: 510
Joined: 16 Feb 2011, 19:03
Location: Summer Hill, NSW

Postby Nozzle » 07 Jan 2016, 08:23

I have a set of clipons already so might not be a bad idea.

What are the rules with regards to bar design for use in competition?

User avatar
mikesbytes
Posts: 6991
Joined: 13 Nov 2006, 13:48
Location: Tempe
Contact:

Postby mikesbytes » 07 Jan 2016, 10:05

Probably in here http://cycling.org.au/Portals/10/Rules% ... 2013.6.pdf

When (if) they measure your bike at the NSW or AU champs they are looking to see that the seat isn't too far forward, the clip-ons don't exceed a certain distance and that the weight is 6.8kg or greater. There can't be any open ends to tubes, ie they need to be plugged or taped over. They don't seem too concerned about rules like 3:1. At the 2011 AU road champs my TT bike failed as the aero bars were too far forward, but as they weren't adjustable they let me race on it anyway

User avatar
Nozzle
Posts: 510
Joined: 16 Feb 2011, 19:03
Location: Summer Hill, NSW

Postby Nozzle » 14 Jan 2016, 14:38

Bought a set of 3T Vola from Wiggle and a short stem. Will see how I go. Any advice on fit/setup?

User avatar
mikesbytes
Posts: 6991
Joined: 13 Nov 2006, 13:48
Location: Tempe
Contact:

Postby mikesbytes » 14 Jan 2016, 19:34


User avatar
Nozzle
Posts: 510
Joined: 16 Feb 2011, 19:03
Location: Summer Hill, NSW

Postby Nozzle » 18 Jan 2016, 06:37



Return to “Track”

Who is online

Users browsing this forum: No registered users and 0 guests